Retort sterilizer

offer retort sterilizer Rotary retort for high viscosity products

offer retort sterilizerRotary retort for high viscosity products

Rotary Retort (Double Tank)

Characteristics of the equipment

 

1. Uniform heat distribution, non dead angle

The circulating water in the retort continuously flows toward the up, down, left and right direction, thus make sure that every point in the retort get the same temperature during the heating, temperature preservation and cooling process. Therefore, the packed food in different position of baskets will be heated uniformly, effectively preventing the dead angle in the sterilization processing , which make sure the uniformly of temperature and heat exchange, Lowering the possibilities of over cooking and guaranteeing accurate F value..

 

2. High temperature and short time sterilization

This equipment adopts the double tank cycled hot water to sterilize. First, heating up the water to the required temperature in advance (except the multi period sterilization), will shorten the sterilization time and obtain higher efficiency.

 

3. High sterilizing temperature

Adopt the latest technology, this equipment utilize hot water recycling to sterilize. During the sterilization processing, all the data about temperature pressure, sterilization time, water and air are automatically controlled. The temperature is correct(with a error less than 0.5°C)

 

4. Energy saving

The medium water used during the sterilization can be used repeatedly, thus saving the energy, time, manpower and materials, reducing the whole production cost.

 

5. Fully automated system

A,Controlling by the touching screen and PLC

B,Controlled by the digital reactor and auto valve during all the period

C,Can fulfill the multi period sterilization according to the technical requirement.

D,Pressure and temperature digitally displayed

E,All the processing being recorded to the disks.

F,There are various sterilization modes pre-stored for choose, to a maximum of 250 sterilization formulas.

G,The Retort adopts the analog temperature controlled system ,you can set multi period heating mode

According to different requirements of different food products, you can set different heating and cooling processing, as well as use the multi period heating sterilization mode and twice cooling mode

H,F value measuring function

 

Each set of water bath Retort could be equipped with the F value measuring function. Being treated by the data processing software, all the sterilization data, including sterilization function condition, F value, time-temperature chart and time-pressure chart will be saved or printed, which offers convenience to production management.

6. The rotary Retort adopts the pneumatic pressed sets, guaranteeing the safety of food product as well as maintaining the equipments' function.

Note: * means it is optional.

Technical parameters of Rotary Retort

Item	Unit		Specification
Diameter of tank body	mm	D3100		D1500
Number of basket		4		4
Maximum working pressure	Mpa	0.35		0.35
Maximum working temperature	°C	137		137
Rotary speed	r/min	3-8		3-8
Steam pressure	Mpa	0.6		0.6
Consumption of steam	Kg/ cycle	300		380
Pressure of cooling water	Mpa	0.3		0.3
Consumption of cooling water	M3/ cycle	5~10		8~12
Consumption of compressed air	M3/min	0.6~1.0		0.8~1.2
Power	KW	13		15
External dimension	LxWxH(mm)	560x2100x3700		5600x2200x4100

Retort sterilizer